Posted   by 

Download Superchips Driver



Important Information for Insight Pro Customers

Click on the button below to download “Distributor” Offline tool for Insight Pro.

*This offline tool is an option available for Insight Pro owners. Use Distributor to upload/export your stock file and load your custom tunes, from a 3rd party dealer of your choice, to your Insight Pro Part Numbers 86000 and 86100.

**Please Note: Currently, the Distributor software will not work on any Mac computers.*

DataViewer software

DataViewer
This software for Windows allows you to open OBD-II Data Logs that you recorded with an Edge monitor.
Updated: 2019-3-28
Version: 3.4.3.1
Compatibility: Windows

  1. Open Throttle is covered with Superchips FLASHPAQ Tuning. Superchips calibrations include the all new MileageXS SAVE and 91 Octane Performance, 91 Octane Towing Performance, and 87 Octane Performance for stock vehicles as well as a Factory Stock setting which allows for Superchips user options. Visit www.superchips.com.
  2. Free superchips programmer driver download software at UpdateStar - Supported Products:GeForce 500 series:GTX 590, GTX 580, GTX 570, GTX 560 Ti, GTX 560, GTX 550 Ti, GT 545, GT 530, GT 520.
Free

Superchips Model 1815 – Vehicle Installation and User Guide

Superchips Model 1815 Flashpaq Tuner
99-06 Ford Expedition, Lincoln Navigator, Excursion V8 4.6L/5.4L, V10 6.8L
99-08 Ford Ranger / Mazda B3000/B4000 V6 3.0L / 4.0L
99-07 Ford F250 / F350 V6 4.2L, V8 4.6L / 5.4L, V10 6.8L
99-08 Ford F150 V6 4.2L, V8 4.6 / 5.4L Trucks

Vehicle Programming Instructions

PLEASE READ THIS ENTIRE INSTRUCTION SHEET BEFORE YOU PROCEED

Thank you for choosing Superchips’ new FLASHPAQ Tuner,
a state-of-the-art, high powered tuning and data acquisition1 tool. We listened to our customers and created this product from your requests.

Fig 1: Device Manager. Fig 2: Superchips bluefin properties. Double click the Superchips bluefin device in the Other devices section and click the Driver tab, then click Update Driver. This will display the Update Driver Software dialog box. Fig 3: Update Driver.

The new FLASHPAQ Tuner includes the following features:

  • Internet Updateable – Supports web updates
  • Built-In DTC Definitions – No lookup manual needed Built-In Help Screens – Reduces need for user manual USB Communications – Connects to any PC2 with USB
  • Custom Application Upgradeable – Download customs Multiple Tuning Levels – User Selectable Tuning Types
  • Increased User Options – Allow user more control Ergonomically Designed Case – Fits well in hand Large, SoftKey Buttons – Easy operation Permanently mounted cable – No assembly required
  • 300% Bigger Screen – Includes graphics support
  • BackLight Screen – Easy to view day or night
  • Your 1815 FLASHPAQ houses specialized databases that contain optimally calibrated, individual vehicle application, performance programs which tune BOTH the engine & transmission. Superchips calibrations include optimization of the entire power band – from idle to redline! Part throttle, as well as Wide Open Throttle is covered with Superchips FLASHPAQ Tuning. Superchips calibrations are intended for stock vehicles.

Minimum Octane Requirements: Thuraya port devices driver download for windows 10 64-bit.

  • Super charged vehicles – 91 octane Performance and Towing V8 – 91 octane Performance and Towing V6 – 87 octane
  • The “87 Octane” Tuning Level provides optimal motor tuning while operating with 87 Octane fuel. (Use of premium fuel is NOT recommended with this tune.)
  • If your vehicle is a Lightning or super-charged Harley Davidson Edition vehicle, an “HP4”tuning level is offered in lieu of the “87 Octane” tuning level for use when a 4lb pulley is used to raise boost pressure. Do not select this tuning level if you have the stock pulley installed. Doing so will degrade engine performance.

The Superchips 1815 FLASHPAQ also offers users the following (options vary by vehicle):

  • Raise the Vehicle Top Speed Limiter
  • Raise the Engine Rev Limiter – Except 05-07’ F250
  • Selectable Axle Ratio Size (Correction of Speedometer & Shift Points) – Except 05-07’ F250
  • Selectable Tire Height (Correction of Speedometer & Shift Points) Selectable automatic transmission Shift Point (per gear)
  • Selectable automatic transmission Shift Pressure (per gear)

Log onto, http://www.superchips.com to check for application updates.

  1. Visit http://www.superchips.comfor availability
  2. Windows XP, 2000 or higher (MAC, UNIX, LINUX Not supported)

Caution
For V8 engines, the “Performance”, “Towing”, and “HP4” tuning level requires that you use at least 91 octane fuel. Using a lower octane fuel while the “Performance”, “Towing”, or “HP4” tuning level is selected for your V8 may cause “pinging” that can be harmful to your vehicle. This is not covered under your vehicle warranty or Superchips warranty.

Your Vehicle’s STOCK Program
The FLASHPAQ Tuner stores a copy of your vehicle’s original stock computer program.
To begin, your vehicle’s computer must contain the manufacturer’s STOCK factory program. If you have used a programmer from another aftermarket company you must use their product to return your computer back to STOCK condition before proceeding. If you have an aftermarket performance-enhancing electronic device installed, it must be removed prior to using the Superchips FLASHPAQ Tuner.

Your Vehicle and Service Centers
If you need to return your vehicle to a service center, restore the vehicle’s program to its STOCK
program. The service center might reprogram your vehicle with an updated STOCK program without your knowledge. If your vehicle has not been returned to its STOCK program prior to
service, the Superchips FLASHPAQ Tuner will no longer be able to program your vehicle. Such
a failure is not covered by the Superchips Inc. warranty.

SuperChips Flashpaq Model 1815 Application Guide

The Superchips Flashpaq model 1815 is intended for use on the the following vehicles. Click through the link for your make-model to ensure you have the proper model or to browse other performance chip options.

  • Ford Excursion Performance Chips
  • Ford Excursion Tuner
  • Ford Excursion Superchips
  • Ford F250 Performance Chips
  • Ford F250 Power Programmer
  • Ford F250 Superchip
  • Lincoln Navigator Performance Chip
  • Lincoln Navigator Power Programmer
  • Lincoln Navigator Superchip
  • Mazda B3000 Performance Chip
  • Mazda B3000 Power Programmer
  • Mazda B3000Superchip
  • Mazda B4000 Performance Chip
  • Mazda B4000 Power Programmer
  • Mazda B4000 Superchip

Vehicle Preparation
Before connecting the FLASHPAQ Tuner to your vehicle, make sure that:
• All power-draining accessories are turned off, including radio, lights, cell phones, etc…
The FLASHPAQ Tuner needs full battery voltage to program your vehicle.
• Ensure your vehicle battery is fully charged and not connected to a battery charger.
• Do not leave the FLASHPAQ Tuner connected and unattended for any length of time.
This prevents unnecessary battery drain.
• Do not remove the programming cable during any programming sequence.
Please follow the FLASHPAQ Tuner display screens.

Important Note Regarding Storage of Your FlashPaq Tuner
It is not recommended to store your FlashPaq Tuner in your vehicle in extreme heat, direct sunlight, or extreme cold (temperatures near or below freezing). These conditions can cause malfunction or damage to the FlashPaq Tuner not covered by the Superchips Inc. warranty.

About Maximum Trailer Weight
The original manufacturer of your vehicle has specified a Maximum Trailer Weight for your vehicle. It may be found in your vehicle owner’s manual. This Superchips product is designed to increase your engine power and performance. It does not change the engine, suspension or drive train characteristics that limit the maximum trailer weight your vehicle is designed to tow. Towing trailer weights above the maximum trailer weight specified by the vehicle manufacturer may cause transmission or other damage. If you wish to tow greater than the maximum trailer weight for your vehicle, modifications to your vehicle may need to be made. Consult your performance a to mechanic for the proper vehicle modifications. Damage caused by towing weights greater than the maximum trailer weight specified for your vehicle shall not be the responsibility of Superchips Inc.

Hardware Overview

Connecting the Tuner to your Vehicle

Superchips Download Free

The Flashpaq plugs into your vehicle’s The port and cable are diagnostic port usually underneath the dash setup to only fit on one below the steering wheel (see white arrow). way. Typically the wider edge faces the top, as shown above.

Opening Screen Overview
When a Flashpaq is first powered up, the opening screen is displayed

  • Flashpaq Setup
    • About
    • Set Screen Contrast
    • Set Screen Backlight
  • Performance Tuning
    • Read Vehicle
    • Change Settings
    • View Settings
    • Program Vehicle
  • Advanced Features
    • Diagnostic Codes
    • Data Logging (visit http://www.superchips.com for updates)

FLASHPAQ Overview and Setup

About
*** Press DOWN to scroll as needed ***

Superchips Driver Download

From the Opening screen

  1. Press ENTER – after selection of FLASHPAQ Setup
  2. Press ENTER – after selection of About

Screen Displays:

  • Product description
  • Product part number
  • “Operating software” Firmware Version #
  • Visit http://www.superchips.com for latest updates
  • “Calibration (Tuning File)” Database Version #
  • Visit http://www.superchips.com for latest updates
  • Product Serial Number
  1. Press OK – Returns to the previous screen
  2. Press EXIT – Returns to the Opening screen

Setting the Screen Contrast

From the FLASHPAQ Setup Screen – Set screen Contrast

  1. Press ENTER – after selection of FLASHPAQ Setup
  2. Press ENTER – after selection of Set Contrast
  3. Press DOWN/UP & SAVE – adjusts screen Contrast to increase or decrease (text/graphics darkness)

Setting the Screen Backlight

From the FLASHPAQ Setup Screen – Set screen Backlight

  1. Press ENTER – after selection of Set Backlight
  2. Press DOWN/UP & SAVE – adjusts screen Backlight to increase or decrease (screen brightness)
  3. Press EXIT – returns to Flashpaq opening screen

Performance Tuning
Quick Start – Read & Program my vehicle NOW!!!
*** Press DOWN to scroll as needed ***

1) Press ENTER – after selection of Performance Tuning
2) Press ENTER – after selection of Read Vehicle
3) Press ENTER – after selection of Read Stock
4) Press OK – Begin with the Ignition OFF
5) Follow ON SCREEN – Prompts including Vehicle Ignition ON/OFF/ON requests (DO NOT START VEHICLE!!)
6) Press EXIT – returns you to previous screen

From the Performance Tuning screen
1) Press ENTER – after selection of Change Setup
2) Press ENTER – after selection of Power Level
3) Press SAVE – after selection of the tuning level
4) Press EXIT – returns you to the previous screen

How

Superchips Tuner Update

From the Performance Tuning screen
1) Press ENTER – after selection of Program Vehicle
2) Follow ON SCREEN – Prompts including Vehicle Ignition OFF/ON requests (DO NOT START VEHICLE!!)

Upon completion, remove cable from vehicle Your vehicle is now programmed with Superchips tuning! You may now start your vehicle.

Return My Vehicle to Factory Stock Now!!!
Please follow the steps below to return your vehicle to factory stock
*** Press DOWN to scroll as needed ***

Superchips

From the Opening screen
1) Press ENTER – after selection of Performance Tuning
2) Press ENTER – after selection of Change Setup
3) Press ENTER – after selection of Power Level
4) Press SAVE – after selecting the Stock tuning level
5) Press EXIT – returns you to previous screen

From the Performance Tuning screen
1) Press ENTER – after selection of Program Vehicle
2) Follow ON SCREEN Prompts including Vehicle Ignition ON/OFF requests (DO NOT START VEHICLE!!!)

Upon completion, remove cable from vehicle
Your vehicle’s program is now returned to factory stock.
You may now start your vehicle.Quick Start – Program my vehicle with User Options NOW!!!

*** Press DOWN to scroll as needed ***
*** Press PLUS/MINUS to adjust options as needed ***

Superchips Flashpaq Download

From the Opening screen
1) Press ENTER – after selection of Performance Tuning
2) Press ENTER – after selection of Read Vehicle
3) Press ENTER – after selection of Read Stock
4) Follow ON SCREEN Prompts including any Vehicle Ignition ON/OFF requests (DO NOT START VEHICLE!!!)
5) Press EXIT – returns you to previous screen

From the Performance Tuning screen
1) Press ENTER – after selection of Change Setup
2) Press ENTER – after selection of Power Level
3) Press SAVE – after selection of the tuning level

Follow ON SCREEN Prompts for octane fuel & option status
1) Press ENTER – after selection of Options
2) Press NEXT/SAVE – adjusts Rev Limiter – You must have Z rated tires to modify the Speed Limiter
3) Press NEXT/SAVE – adjusts Speed Limiter
4) Press SAVE – after adjusting Axle Size
5) Press SAVE – after adjusting Tire height
6) Press SAVE – after adjusting (WOT) shift point 1-2
7) Press SAVE – after adjusting (WOT) shift point 2-3
8) Press SAVE – after adjusting (WOT) shift point 3-4
9) Press SAVE – after adjusting shift pressure 1-2
10) Press SAVE – after adjusting shift pressure 2-3
11) Press SAVE – after adjusting shift pressure 3-4
12) Press EXIT – returns you to previous screen

From the Performance Tuning screen
1) Press ENTER – after selection of Program Vehicle
2) Follow ON SCREEN Prompts including Vehicle Ignition ON/OFF requests (DO NOT START VEHICLE!!!)

Download Superchips Drivers

Upon completion, remove cable from vehicle
Your vehicle is now programmed with Superchips and user options!
You may now start your vehicle.

Return My Vehicle to Factory Stock Now!!!
Please follow the steps below to return your vehicle to factory stock
*** Press DOWN to scroll as needed ***

From the Opening screen
1) Press ENTER – after selection of Performance Tuning
2) Press ENTER – after selection of Change Setup
3) Press ENTER – after selection of Power Level
4) Press SAVE – after selecting the Stock tuning level
5) Press EXIT – returns you to previous screen

From the Performance Tuning screen
1) Press ENTER – after selection of Program Vehicle
2) Follow ON SCREEN Prompts including Vehicle Ignition ON/OFF requests (DO NOT START VEHICLE!!!)

Upon completion, remove cable from vehicle
Your vehicle’s program is now returned to factory stock.
You may now start your vehicle.

For FAQ’s about this unit, refer to this post: Superchips Flashpaq Model 3815 – Vehicle Installation and User Guide